Update: Ive created more Slimes! I finally created some Largos. Check it out here: \r<br>\r<br>Today is day 12 of #3DPrintmas. And Im bringing more Slimes to the party. These little guys are from a game called Slime Rancher and these are the last 3 of the regular slimes.\r<br>\r<br>I created them in Fusion 360. I used the base of the other slimes I created so the main shape is the same. Then I used sketches to extrude out the extra details and intersect them with the main bodies. The tarr I ually scaled up just a bit since they are bigger than the normal slimes slightly.\r<br>\r<br>Then after I printed them out (settings below) I handed them off to my wife to paint. She use filler primer to prep them for painting. Then she painted them with acrylic paints and a paintbrush.\r<br>\r<br>Print Settings:\r<br>Printer: Robo3D R1 & Da Vinci 1.0 Pro\r<br>Filament: Hatchbox PLA\r<br>Layer Height: 0.1mm\r<br>Infill: 20%\r<br>Supports: No\r<br>Raft: No\r<br>I see a lot of people print these slimes without support and 0% infill\r<br>\r<br>3D Files: \r<br>\r<br>Thanks for Watching!\r<br>Dont forget to like and subscribe!\r<br>Follow me on Twitter:
